Cross-line laser: range in practice – with and without receivers
Die kurze Antwort: Ein Empfänger hilft, wenn die Linienmitte nicht sicher sichtbar ist. Dafür müssen Empfänger, Signal und Modell zusammenpassen; Farbe oder die Bezeichnung 4D reichen nicht. Aktivieren Sie den vorgesehenen Impulsmodus und übertragen Sie die Höhe an der Referenzmarkierung des Empfängers.
In this article
Manufacturers call impressive numbers – but how far do you get Really In everyday life? Here we explain the range Interior vs. Outside, with and without consigneegive clear set recommendations and show how you perform Reproducible test.
Category: Cross-Line Laser · Omniliner G3D · XLiner Pento 360G · Tiles 4D · Smart 4D Plus · XLiner 360G · TruSlope · Consignee ULR · Green target · Target Red · Tripods & poles · Guarantee 2+1 years
TL;DR: quick decision
| Scenario | Setup | Why | Direct link |
|---|---|---|---|
| Interior design, bright rooms | 3×360° Green without consignee | Best visibility, full space coverage | Omniliner G3D / Pento 360G |
| Bath/tiles with two heights | 4D Green without consignee | 2xH + 2xV simultaneously → faster layout | Tiles 4D / Smart 4D Plus |
| Outside / long distances | Consignee ULR + tripod | Color-independent precise display at long distance | Consignee ULR · Standalone |
| Slopes (gradient, shower) | TruSlope (pendulum sensor) | Exact angles, as sensor measures directly on the pendulum | TruSlope |
Manufacturer specifications are laboratory/optimal values. In practice, surfaces, light, distance, stability count – below we explain the factors.
Range without receiver (inside)
Without a receiver, your EyeHow far you can see the line for sure. Green is usually clearer to the eye.
- Typical indoor values: 15–30 m comfortably usable (depending on model and room).
- Bright light/gloss surfaces: Target panel (green/red) increases contrast and accuracy at the point.
- Stands & brackets: Stability = precise line over distance; saves time on grids/profiles.
Range with receiver (outside)
With Consignee ULR The line color becomes secondary: the receiver detects pulsed lines and clearly shows the center even in the sun.
- Practice: Significantly larger working areas, safe display (arrows/signal sound) also beyond the line of sight.
- Assembly: Laser and receiver on Stand/Telescopic rod Reproducible heights.
- Note: Activate the Receiver mode laser (pulsed lines).
What really determines the range
- Optics & Diode Power: Beam divergence, collimation, pulsed operation.
- Ambient lighting: Sun/luminaires reduce visibility – receiver compensates.
- Surface: Matt/hell reflects differently than dark/shining → target panels help.
- Stability: Tripod/holder prevent micro movements = clean intersection points.
- Colour: Green is more visible to the eye, but affects receiver range less.
Set recommendations after use
| Deployment | Device | Accessories | Advantage |
|---|---|---|---|
| Drying | Omniliner G3D / Pento 360G | Telescopic rod, Wall Mount Province | Full room coverage, 90° references, reproducible heights |
| Tiles/bath (two levels) | Tiles 4D / Smart 4D Plus | Target panel, Standalone | 2xH + 2xV simultaneously, faster grid |
| Outside/Sun | Omniliner G3D + Consignee ULR | Standalone, clamps | Large distances, clear display regardless of color |
| Slopes (gradients) | TruSlope | Standalone | Pendulum sensor measures the Actual pendulum angle → exact inclination |
How we test (methodology)
- Interior: 10/20/30 m at Target panel, 3 repetitions, mean & dispersion.
- Outside: 30–60 m (depending on the model) with Consignee ULR, laser/receiver on Standalone, timer 3 s.
- Documentation: Light conditions, surface, mode (receiver on/off), colour (green/red).
- Security: Laser class 2 according to DIN EN 60825-1 (do not look into the beam).
FAQ
Why do I not manage the manufacturer's range inside?
Data are laboratory/optimal values. Bright light, shiny surfaces and instability reduce the usable distance. Targets and tripods help.
Does the receiver bring something inside?
Yes – especially at long distances or with poor surfaces. The receiver displays the line center regardless of visibility.
Is green farther than red?
More visible to the eye, but range is a system question (optics, pulse, receiver). With receiver, the color is usually secondary.
How often to calibrate?
At least annually or after push/transport. Details of the guarantee: 2+1 years.
