Cross-line lasers
Smart 4D Plus
- Working range / with detector
- 30 m / 60 m
- Self-levelling accuracy
- ±0,3 mm/m
- Self-levelling range
- ±3°
4D KreuzlinienlaserTwo verticals, two horizontals.
4D lasers with four 360° planes for work on walls, ceilings and floors. Compare functions and scope of delivery.
More about 4D Kreuzlinienlaser
Cross-line lasers
Fliesen 4D
- Working range / with receiver
- 30/60 m
- Levelling accuracy
- ±0.3 mm/m
- Self-levelling range
- ± 3°
€279,90incl. VAT
No products for this selection.
4D cross-line laser: all models at a glance
| Model | Range | Accuracy | Protection | Price |
|---|---|---|---|---|
| Smart 4D Plus | 30 m / 60 m | IP54 | €239,90 | |
| Fliesen 4D | 30/60 m | ±0.3 mm/m | IP54 | €279,90 |
Buying advice, details & frequently asked questions
4D cross-line lasers project two horizontal and two vertical 360° planes – one of them close to the floor. This helps with tiling and interior finishing when two horizontal reference heights are needed at the same time. The actual height of the lower line depends on design and set-up. CONDTROL offers this configuration with the Fliesen 4D and the Smart 4D Plus.
Fewer planes enough? Three 360° planes: 3D cross-line laser. Compact for indoor use: 2D cross-line laser. Fully equipped: kits with accessories. All models at a glance Cross-line lasers.
Before laying: Planning the tile grid, edge pieces and first row with a laser.
Frequently asked questions
Which planes does a 4D laser project?
A 4D laser with 4 × 360° projects two horizontal and two vertical planes. The height of the lower horizontal plane and the available adjustment range depend on the model.
Is 4D automatically more accurate than 3D?
No. The number of planes describes the projection, not the measuring accuracy. Compare the accuracy specification in mm/m and choose the planes to suit the job.
What equipment do I need for floor work?
Check the height of the lower horizontal plane and the adjustment options with the matching platform or bracket. Accessories are only included if they are listed in the scope of delivery of the chosen tool or kit.
