Lines for tiling & interior finishing.
Levelling, angles & distances.
Transfer heights all around.
Check materials, heat & cables.
Goes with it 2
H160
€32,90| Omniliner G3D | ||
|---|---|---|
| Key figures | ||
| Range / with receiver | 50 m / 100 m | 40 m / 80 m |
| Accuracy | ±0,2 mm/m | ±0,2 mm/m |
| Laser lines | 3 × 360° (1 horizontal / 2 vertical) | 3 × 360° |
| Laser colour | Green | Green |
| Self-levelling range | ±4° | ±4° |
| Dust and water protection | IP65 | IP65 |
| Power supply | Li-ion 3.7 V 5200 mAh | 2 × Li-ion 3.7 V 5000 mAh |
| Tripod thread | 5/8" and 1/4" | 5/8" and 1/4" |
| Functions | ||
| Receiver mode | ||
| Tilt mode | ||
| Plumb points | k. A. | |
| Bluetooth / app | k. A. | |
| Remote control | k. A. | |
| Display | k. A. | |
| Digital tilt | k. A. | |
n/a = not specified
Switch planes, adjust brightness, activate pulse mode and check the battery level – via Bluetooth from your smartphone
The CONDTROL Omniliner G3D is a green 3D cross-line laser with three 360° laser planes and Bluetooth control for interior finishing, tiling, drywall and installation. It levels itself up to ±4°, works with an accuracy of ±0.2 mm/m and is protected to IP65 against dust and water jets.
Room layout, laying tiles and floors, drywall, cable and pipe routes, decoration and furniture installation. The planes run around all walls, so the tool doesn't need to be turned while you work. The green laser (520 nm) is much more visible to the eye in bright light than a red one.
The laser emitters are arranged so that the tool can stand directly against the wall or in the corner. This saves auxiliary measurements and material when aligning in hard-to-reach places.
Via Bluetooth and the free XLiner Remote app, you switch laser planes and brightness from a distance, without walking to the tool and moving it.
In manual slope mode, the laser projects inclined lines, for example for stairs and roof slopes. In pulse mode, it works with a laser receiver and extends the working range to 100 m, even in bright light and outdoors.
The visibility of the line depends on the ambient light and the surface. In sunlight or over long distances, work in pulse mode with a receiver. The stated accuracy applies within the self-levelling range of ±4°; place the tool on a stable surface or tripod.
Two 3.7 V / 5200 mAh Li-ion batteries: while one is charging, you keep working with the second.
Omniliner G3D, 2 rechargeable batteries, charger, user manual.
2 years' warranty; one additional year after registration in accordance with the warranty terms.
Compare 3D cross-line lasers. With wall bracket, clamp holder, target plate and case: Omniliner G3D Kit. More models with app: cross-line lasers with remote control and Bluetooth.
From the field
What matters shows on the job.
Experiences with the CONDTROL Omniliner G3D cross-line laser.
From 3 reviews
Die Verarbeitungsqualität hat mich positiv überrascht.
Zwei Akkus im Lieferumfang und eine Tasche für den Transport sind praktisch.
Ich habe lange nach einem Nivelliergerät mit drei Ebenen gesucht und mich bewusst für dieses Modell entschieden.
Meiner Meinung nach der beste Laser in seiner Klasse, mir sind keine direkten Alternativen bekannt.
Meinen vorherigen CONDTROL Laser habe ich fast fünf Jahre genutzt, er funktioniert bis heute einwandfrei, war aber inzwischen einfach veraltet.
Bei diesem Modell gefällt mir besonders die Bluetooth Funktion.
Über die App lassen sich die Laserlinien bequem steuern.
Ich kann das Gerät klar empfehlen, den Preis ist es auf jeden Fall wert und ich habe den Kauf nicht bereut
Hat mir sehr gut gefallen.
Ich habe ihn mit einem anderen Laser verglichen, beide zeigen das Gleiche an, also passt die Kalibrierung.
Liegt gut in der Hand und die Linien sind schön hell, ich habe da einen direkten Vergleich.
€475,00