{"title":"Latest CONDTROL innovations","description":"\u003cp class=\"p1\"\u003eThe CONDTROL new arrivals collection presents the most advanced solutions in laser measuring technology and precise construction surveying. Here, professionals, interior finishers and trade businesses will find our latest tool generations with extended functions, higher measuring performance and optimised technologies for professional use.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eOur new cross-line lasers, rotary lasers and laser distance meters combine robust construction, reliable accuracy and innovative functions such as 4D projection, ultra-bright green lasers, Bluetooth connectivity and intelligent assistance modes for precise work on the building site and in interior finishing. Accessories such as tripods, brackets and receivers have also been further developed to ensure maximum stability and efficiency in measuring and alignment work.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe new products in this collection stand for technical progress, high product quality and practical design. All tools are tested to strict quality standards and offer real performance data without artificially inflated range figures. For our customers, this means reliable measuring results, a long service life and a professional tool that proves itself in daily use.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eWith CONDTROL you invest in precise measuring technology, fast project completion and equipment that handles even demanding tasks with ease. All new products come with free shipping in Germany and the extended 2+1 years' warranty.\u003c\/p\u003e","products":[{"product_id":"bohrpunktdetektor-condtrol-exit-point","title":"CONDTROL Exit Point drilling point detector – transmitter and receiver","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL Exit Point transfers a drilling point exactly through walls, floors and ceilings. The transmitter is fixed at the desired point on one side of the component; the receiver finds the exact opposite point on the other side and also shows the component thickness. The hole hits the mark the first time, without detours via edges, tape measure and test holes.\u003c\/p\u003e\n\u003ch2\u003eWhat tasks is the Exit Point suitable for?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCore drilling for ventilation and air conditioning\u003c\/li\u003e\n\u003cli\u003eOpenings for pipes and cables\u003c\/li\u003e\n\u003cli\u003eWall openings during renovation\u003c\/li\u003e\n\u003cli\u003eCeiling openings between floors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTwo tools, one drilling point\u003c\/h3\u003e\n\u003cp\u003eThe transmitter is attached at the reference point with the supplied adhesive putty; the central hole marks the point. On the other side, move the receiver slowly over the surface. Red arrows show the direction and a tone rises in pitch as you get closer. When all four green LEDs light up, the receiver's central hole is exactly opposite the transmitter. The display also shows the component thickness in centimetres or inches.\u003c\/p\u003e\n\u003ch3\u003eCheck before drilling\u003c\/h3\u003e\n\u003cp\u003eThe transmitter detects metal up to 50 mm and live cables (230 V) up to 150 mm deep. So you can see before drilling whether reinforcement or cables are in the way.\u003c\/p\u003e\n\u003ch3\u003eAngled holes and thick components\u003c\/h3\u003e\n\u003cp\u003eFor angled holes, hold transmitter and receiver at the same angle. If metal is in the way, measure with an offset; for thick components, average over several reference points.\u003c\/p\u003e\n\u003ch2\u003eFunctions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLocating the drilling point through components from 2 to 150 cm\u003c\/li\u003e\n\u003cli\u003eComponent thickness display from 2 to 200 cm\u003c\/li\u003e\n\u003cli\u003eMetal detection up to 50 mm, cable detection up to 150 mm\u003c\/li\u003e\n\u003cli\u003eFour green LEDs, direction arrows and tone\u003c\/li\u003e\n\u003cli\u003eMeasurement at an angle, with offset and as multi-point measurement\u003c\/li\u003e\n\u003cli\u003eOne-button operation, display in cm or inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUnderstanding accuracy\u003c\/h2\u003e\n\u003cp\u003eAccording to the manufacturer, the distance display is accurate to 1 cm for component thicknesses of 3 to 10 cm and to 10% for 11 to 200 cm. Locating the opposite point achieves 3% of the distance. Metal in the component can interfere with locating; in that case work with an offset or several reference points.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003eBoth tools run on AAA batteries, about 12 hours of operating time.\u003c\/p\u003e\n\u003cp\u003eReceiver, transmitter, 6 AAA batteries, adhesive putty for attaching the transmitter, user manual (DE, EN, FR, IT, ES), plastic case.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eMore detectors\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/detectors\"\u003eCompare detectors\u003c\/a\u003e. Finding cables in the wall: \u003ca href=\"\/en\/products\/condtrol-scan-cable-detector\"\u003eScan\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":47089478992215,"sku":"3-12-024","price":469.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/exit-point-set-front.png?v=1790883009"},{"product_id":"laserentfernungsmesser-condtrol-traccer-30","title":"Traccer 30 | Ultra-compact laser distance meter","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL Traccer 30 is an ultra-compact laser distance meter with a rechargeable battery: 81 × 43 × 22 mm, 50 g. It measures from 0.03 to 30 m with a stated accuracy of ±2 mm and is IP54-protected against dust and splash water.\u003c\/p\u003e\n\u003ch2\u003eWhat measuring tasks is the Traccer 30 suitable for?\u003c\/h2\u003e\n\u003cp\u003eFor anyone who wants to have a distance meter with them at all times: door and window openings, room dimensions, material requirements for floors and walls. It fits in any trouser or tool pocket. Professionals use it as a second tool, DIYers as a replacement for the tape measure.\u003c\/p\u003e\n\u003ch3\u003eFull functions in a mini format\u003c\/h3\u003e\n\u003cp\u003eIn addition to single measurement, the Traccer 30 calculates areas and volumes, measures continuously while showing the smallest value and determines distances indirectly by Pythagoras at hard-to-reach points. All functions are behind the FUNC button, and the illuminated display is easy to read even in low light.\u003c\/p\u003e\n\u003ch2\u003eMeasuring functions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSingle and continuous measurement with min value\u003c\/li\u003e\n\u003cli\u003eArea and volume calculation\u003c\/li\u003e\n\u003cli\u003eIndirect measurement by Pythagoras\u003c\/li\u003e\n\u003cli\u003eMeasurement from the rear edge\u003c\/li\u003e\n\u003cli\u003eRubberised, non-slip housing, IP54\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUnderstanding range and accuracy\u003c\/h2\u003e\n\u003cp\u003eThe 30 m range applies to well-reflecting targets. Direct sunlight and shiny or transparent surfaces can affect the measurement. For long distances outdoors, models with more range or a viewfinder are suitable.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003eIntegrated 3.7 V \/ 200 mAh Li-ion battery, full charge in about 3 hours. The battery level is shown on the display; do not measure while charging.\u003c\/p\u003e\n\u003cp\u003eTraccer 30, protective pouch, charging cable, user manual.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eCompare models and applications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/laser-distance-meters-up-to-50m\"\u003eLaser distance meters up to 50 m\u003c\/a\u003e. With 40 m and battery operation: \u003ca href=\"\/en\/products\/condtrol-smart-40-lite-laser-distance-meter\"\u003eSmart 40 Lite\u003c\/a\u003e. All models: \u003ca href=\"\/en\/collections\/laser-distance-meters\"\u003eCompare laser distance meters\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":47782717849943,"sku":"1-001-001","price":39.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/traccer30-front-corrected.png?v=1791048729"},{"product_id":"kreuzlinienlaser-condtrol-fliesen-4d","title":"CONDTROL Fliesen 4D cross-line laser for tilers","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL Fliesen 4D is a green cross-line laser for tilers: two horizontal 360° planes, one 18 mm above the floor and one below the ceiling, plus two vertical planes. Accuracy ±0.3 mm\/m, self-levelling up to ±3°, metal structure and IP54. Supplied in a hard case with brackets, target plate and two rechargeable batteries.\u003c\/p\u003e\n\u003ch2\u003eWhat tasks is the Fliesen 4D suitable for?\u003c\/h2\u003e\n\u003cp\u003eFor floor and wall tiles in one go. The lower plane sets the first row of tiles directly at the floor, the upper one the top edge below the ceiling. Because all planes are projected all the way round, the tool doesn't need to be turned or moved when laying out a room. This saves time and material.\u003c\/p\u003e\n\u003ch3\u003eThree operating modes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-levelling up to 3°: for floors, walls, fence building and wallpapering\u003c\/li\u003e\n\u003cli\u003eLocked compensator: inclined lines and planes for stairs, corners and decorative elements\u003c\/li\u003e\n\u003cli\u003ePulse mode: for very bright light, together with the CONDTROL laser receiver up to 60 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFunctions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo horizontal and two vertical 360° planes, lower plane 18 mm above the floor\u003c\/li\u003e\n\u003cli\u003eTrue green laser 515 nm, clearly visible even in daylight\u003c\/li\u003e\n\u003cli\u003eAccuracy ±0.3 mm\/m, range 30 m, 60 m with receiver\u003c\/li\u003e\n\u003cli\u003eMetal structure, non-slip ribbed rubber coating, IP54\u003c\/li\u003e\n\u003cli\u003e1\/4″ and 5\/8″ tripod threads, lifting platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUnderstanding range and accuracy\u003c\/h2\u003e\n\u003cp\u003eThe visibility of the line depends on the ambient light and the surface. Outdoors and over long distances, work in pulse mode with a receiver. The stated accuracy applies within the self-levelling range of ±3°. IP54 protects against dust and splash water.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003eTwo 3.7 V \/ 4000 mAh Li-ion batteries. According to the manual, runtime is 20 hours with one plane switched on and 5 hours with all planes. While one is charging, you keep working with the second. With a battery adapter, the laser also runs on 18 V tool batteries from \u003ca href=\"\/en\/products\/condtrol-fliesen-4d-battery-adapter-for-bosch-18\"\u003eBosch\u003c\/a\u003e, \u003ca href=\"\/en\/products\/condtrol-fliesen-4d-battery-adapter-for-makita-18\"\u003eMakita\u003c\/a\u003e, \u003ca href=\"\/en\/products\/condtrol-fliesen-4d-battery-adapter-for-dewalt-18\"\u003eDeWalt\u003c\/a\u003e or \u003ca href=\"\/en\/products\/condtrol-fliesen-4d-battery-adapter-for-metabo-18\"\u003eMetabo\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFliesen 4D, 2 rechargeable batteries, charger, lifting platform, wall bracket, clamp holder, magnetic target plate, hard case, user manual.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eCompare models and applications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/cross-line-laser-4d\"\u003eCompare 4D cross-line lasers\u003c\/a\u003e. Only with floor-level plane, and more affordable: \u003ca href=\"\/en\/products\/condtrol-boden-3d-cross-line-laser\"\u003eBoden 3D\u003c\/a\u003e. Matching receiver: \u003ca href=\"\/en\/collections\/laser-receivers\"\u003eLaser receiver\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":47808524058967,"sku":"1-002-002","price":279.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/Fliesen_4D_new-001.webp?v=1763562107"},{"product_id":"laser-entfernungsmesser-condtrol-xp5","title":"CONDTROL XP5 laser distance meter","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL XP5 is a laser distance meter for long distances indoors and outdoors. It measures from 0.05 to 150 m with a stated typical accuracy of ±1.5 mm. The digital viewfinder with 8x zoom and crosshairs helps with aiming when the laser dot can hardly be seen with the naked eye in sunlight.\u003c\/p\u003e\n\u003ch2\u003eWhat measuring tasks is the XP5 suitable for?\u003c\/h2\u003e\n\u003cp\u003eOutdoor dimensions and façades: lengths and heights of buildings, halls, fences and masts. Landscaping and window installation on open building sites. Indoors: areas, volumes and special shapes. Four reference points (rear, front, foot, tripod) and the 1\/4″ tripod thread allow steady, repeatable measurement series.\u003c\/p\u003e\n\u003ch3\u003e8x digital viewfinder\u003c\/h3\u003e\n\u003cp\u003eThe camera image with crosshairs shows where the laser is pointing, even at long distances and in bright light. The camera does not replace a suitable target surface and does not guarantee maximum range in all lighting conditions.\u003c\/p\u003e\n\u003ch3\u003ePoint-to-point and geometry\u003c\/h3\u003e\n\u003cp\u003ePoint-to-point measures the distance between two sighted points. In addition there are Pythagoras, wall areas, triangles and circles, plus cylinder and cone volumes. The tilt sensor calculates heights and horizontal distances, and the digital spirit level shows gradients.\u003c\/p\u003e\n\u003ch2\u003eMeasuring functions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength measurement, area and volume calculation, min\/max tracking\u003c\/li\u003e\n\u003cli\u003ePythagoras, point-to-point measurement\u003c\/li\u003e\n\u003cli\u003eWall area, triangle, circle, cylinder and cone volume\u003c\/li\u003e\n\u003cli\u003eTilt sensor, digital spirit level, timer for delayed measurement\u003c\/li\u003e\n\u003cli\u003eMemory for 50 values, addition and subtraction\u003c\/li\u003e\n\u003cli\u003eBluetooth for the CONDTROL Smart Measure app: photo sketches and room plans\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUnderstanding range and accuracy\u003c\/h2\u003e\n\u003cp\u003eDirect sunlight, poorly reflecting targets and shiny or transparent surfaces can affect the measurement. The nominal range is not a promise for every target; for long distances, put the tool on a tripod and use a target plate if needed. IP54 describes protection against dust and splash water; the tool is not waterproof.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003e3 × AAA NiMH rechargeable batteries, 1.2 V \/ 800 mAh, charging via USB-C; 6 to 8 hours of work per charge.\u003c\/p\u003e\n\u003cp\u003eXP5, USB-C cable, protective pouch, wrist strap, user manual.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eCompare models and applications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/laser-distance-meters\"\u003eCompare laser distance meters by task\u003c\/a\u003e. More models with camera: \u003ca href=\"\/en\/collections\/laser-distance-meters-camera\"\u003edistance meters with viewfinder\u003c\/a\u003e. Matching accessories: \u003ca href=\"\/en\/products\/condtrol-h140-tripod\"\u003eH140 tripod\u003c\/a\u003e, \u003ca href=\"\/en\/products\/condtrol-reflective-target-plate\"\u003ereflective target plate\u003c\/a\u003e, \u003ca href=\"\/en\/products\/condtrol-adapter-screw-5-8-to-1-4\"\u003e5\/8″ to 1\/4″ adapter\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":50145888174423,"sku":"1-4-0123","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/XP5_-_1.webp?v=1763562025"},{"product_id":"laser-entfernungsmesser-condtrol-vector-250","title":"Laser-Entfernungsmesser CONDTROL Vector 250","description":"","brand":"CONDTROL","offers":[{"title":"Default","offer_id":50146391654743,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/Vector_200_-_1.webp?v=1761181942"},{"product_id":"kreuzlinienlaser-condtrol-truslope","title":"CONDTROL TruSlope cross-line laser – digital slope measurement, 3×360° green laser","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL TruSlope is a green slope laser with three 360° planes and digital slope measurement. You enter the desired gradient in degrees, percent or mm\/m, the colour OLED display shows the actual value in real time, and the included tilt adapter fine-tunes the angle. Accuracy ±0.2 mm\/m, IP65, metal frame.\u003c\/p\u003e\n\u003ch2\u003eWhat tasks is the TruSlope suitable for?\u003c\/h2\u003e\n\u003cp\u003eWherever you work not horizontally but with a defined gradient:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRoad and paving construction: gradients for car parks, footpaths and driveways so that water drains away as intended\u003c\/li\u003e\n\u003cli\u003eRoof construction and stairs: inclination angles for design and installation as specified\u003c\/li\u003e\n\u003cli\u003eTerrain and drainage: laying out drainage systems\u003c\/li\u003e\n\u003cli\u003eWet rooms and tiles: gradients in bathrooms, showers, on balconies and terraces\u003c\/li\u003e\n\u003cli\u003ePipes and ramps: defined slope for waste water and logistics ramps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEntering the slope digitally\u003c\/h3\u003e\n\u003cp\u003eThe built-in tilt sensor measures the angle of the laser plane, and the display shows it in the selected unit. With the tilt adapter you adjust steadily and sensitively to the target value, even for long sections and repeated work.\u003c\/p\u003e\n\u003ch3\u003eThree green 360° planes and plumb points\u003c\/h3\u003e\n\u003cp\u003eOne horizontal and two vertical planes cover the whole room. The vertical planes form zenith and nadir points, so you can transfer marks from the floor to the ceiling. Each plane can be switched individually, which saves battery.\u003c\/p\u003e\n\u003ch3\u003eBuilt for the building site\u003c\/h3\u003e\n\u003cp\u003eMetal frame and metal optics housing, IP65 against dust and water jets, rubberised inserts, non-slip grip and silicone-coated buttons. Mounting on tripods with 1\/4″ or 5\/8″ or via an eyelet on a screw or nail.\u003c\/p\u003e\n\u003ch2\u003eFunctions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDigital slope display in degrees, percent or mm\/m\u003c\/li\u003e\n\u003cli\u003eThree green 360° planes (520 nm), zenith and nadir point\u003c\/li\u003e\n\u003cli\u003eAccuracy ±0.2 mm\/m, self-levelling ±4°\u003c\/li\u003e\n\u003cli\u003eWorking range 40 m, 80 m with receiver\u003c\/li\u003e\n\u003cli\u003ePlanes switchable individually, OLED display with battery indicator\u003c\/li\u003e\n\u003cli\u003eIP65, metal frame, 1\/4″ and 5\/8″ tripod threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUnderstanding range and accuracy\u003c\/h2\u003e\n\u003cp\u003eThe visibility of the line depends on the ambient light and the surface. In sunlight or over long distances, work with a receiver. The accuracy applies to the levelled plane within ±4°; for inclined planes, the tilt sensor reading is what counts.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003eTwo Li-ion batteries of 5000 mAh each, 8 to 20 hours of continuous operation depending on the number of active planes. The battery indicator on the display warns you in good time.\u003c\/p\u003e\n\u003cp\u003eTruSlope, 2 Li-ion batteries, tilt adapter, wall bracket, charger, plastic case, user manual.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eCompare models and applications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/cross-line-laser-3d\"\u003eCompare 3D cross-line lasers\u003c\/a\u003e. For gradients on large outdoor areas: \u003ca href=\"\/en\/collections\/rotary-lasers\"\u003eRotary lasers\u003c\/a\u003e. Accessories: \u003ca href=\"\/en\/collections\/laser-receivers\"\u003eLaser receiver\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/tripods-poles\"\u003eTripods\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":50146445918551,"sku":"7-2-0122","price":479.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/truslope-main-corrected.png?v=1791048729"},{"product_id":"betonprufhammer-condtrol-beton-pro","title":"CONDTROL Beton Pro concrete test hammer","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL Beton Pro is a digital concrete test hammer for the non-destructive determination of concrete strength and homogeneity using the impact pulse method. Measuring range 3.5 to 99.9 MPa, accuracy ±7%, memory for 500 averages.\u003c\/p\u003e\n\u003ch2\u003eWhat tasks is the Beton Pro suitable for?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConcrete strength in new buildings and when inspecting existing buildings and structures\u003c\/li\u003e\n\u003cli\u003eQuality control of sand-lime bricks and bricks\u003c\/li\u003e\n\u003cli\u003eAssessing strength, hardness and elastic-plastic properties, detecting inhomogeneities and poorly compacted areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsable in the lab and directly on the building site; the results help assess material properties and the durability of a component.\u003c\/p\u003e\n\u003ch3\u003eAutomatic evaluation\u003c\/h3\u003e\n\u003cp\u003eThe Beton Pro detects the impact direction itself and takes it into account. You select the material (lightweight concrete, heavyweight concrete, brick) and the unit (MPa, kg\/cm², N\/mm², PSI); the OLED display shows the average clearly even in poor light. Menu languages: German, English, Russian.\u003c\/p\u003e\n\u003ch3\u003eRobustly built\u003c\/h3\u003e\n\u003cp\u003eAutomatic impact mechanism with carbide impact head, metal housing, silicone protector on the trigger and non-slip grip coating, secure to hold even with gloves.\u003c\/p\u003e\n\u003ch2\u003eFunctions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eImpact pulse method, measuring range 3.5–99.9 MPa, ±7%\u003c\/li\u003e\n\u003cli\u003eMaterial selection: lightweight concrete, heavyweight concrete, brick\u003c\/li\u003e\n\u003cli\u003eAutomatic detection of impact direction\u003c\/li\u003e\n\u003cli\u003eMemory for 500 averaged measurements\u003c\/li\u003e\n\u003cli\u003eOLED display, switchable units, 3 menu languages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInterpreting the result correctly\u003c\/h2\u003e\n\u003cp\u003eThe method assesses near-surface strength. Smooth the test spot beforehand with the grinding stone and average several impacts. For assessing in-situ compressive strength according to DIN EN 13791, the readings are calibrated against cores. Where proof by core is required, the tool does not replace it, but it quickly shows where samples make sense.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003e2 × AA batteries (LR6), up to 25 hours of operation.\u003c\/p\u003e\n\u003cp\u003eBeton Pro, grinding stone, reference standard for calibration, 2 AA batteries, belt pouch, plastic case, user manual.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eCompare models\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/concrete-test-hammers\"\u003eCompare concrete test hammers\u003c\/a\u003e. Mechanical, without batteries: \u003ca href=\"\/en\/products\/condtrol-beton-concrete-test-hammer\"\u003eConcrete\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":50146846933335,"sku":"3-10-024","price":1489.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/Beton-Pro_001.jpg?v=1741781296"},{"product_id":"layout-projektor-condtrol-progressor","title":"CONDTROL Progressor layout projector – patented grid for shelves, tiles, drywall \u0026 interior finishing","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL Progressor is a layout projector with a green laser grid for drywall, suspended ceilings, installation and interior finishing. Instead of individual lines, it projects a grid of 60 equal cells onto a wall, ceiling or floor. The grid spacing adapts automatically to the surface.\u003c\/p\u003e\n\u003ch2\u003eWhat tasks is the Progressor suitable for?\u003c\/h2\u003e\n\u003cp\u003eWherever many evenly spaced reference points are needed that would otherwise be marked with tape measure and pencil:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSubstructures for plasterboard, CD and UD profiles\u003c\/li\u003e\n\u003cli\u003eHangers for suspended and grid ceilings\u003c\/li\u003e\n\u003cli\u003ePlanning and installing cable trays and pipework\u003c\/li\u003e\n\u003cli\u003ePositioning lights, niches and built-in furniture symmetrically\u003c\/li\u003e\n\u003cli\u003eLaying tiles and floors to a grid, decorative wall design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePatented grid projection\u003c\/h3\u003e\n\u003cp\u003eThe Progressor's grid technology is patented. A cross-line laser shows a line along which you measure; the Progressor shows the whole grid at once. For symmetrical installations and large areas this eliminates many intermediate measurements, and planning errors are spotted immediately.\u003c\/p\u003e\n\u003ch2\u003eFunctions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLaser grid with 60 cells, automatically scaled to the surface\u003c\/li\u003e\n\u003cli\u003eProjection onto wall, ceiling or floor\u003c\/li\u003e\n\u003cli\u003eSelf-levelling ±4°, accuracy ±0.2 mm\/m\u003c\/li\u003e\n\u003cli\u003eWorking range 30 m, 60 m with receiver\u003c\/li\u003e\n\u003cli\u003eGreen laser 520 nm, IP65 housing\u003c\/li\u003e\n\u003cli\u003eMounting with magnet, cable tie, screw or on a tripod (1\/4″)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUnderstanding range and accuracy\u003c\/h2\u003e\n\u003cp\u003eHow visible the grid is depends on the ambient light and the surface. In very bright light or at long distances, a receiver helps. The stated accuracy applies within the self-levelling range of ±4°.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003e4 × 1.5 V AA batteries, up to 8 hours of operation.\u003c\/p\u003e\n\u003cp\u003eProgressor, batteries, cable ties, EVA transport case, user manual.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eCompare models and applications\u003c\/h2\u003e\n\u003cp\u003eFor individual lines and planes instead of a grid: \u003ca href=\"\/en\/collections\/cross-line-lasers\"\u003eCompare cross-line lasers\u003c\/a\u003e. New tools in the range: \u003ca href=\"\/en\/collections\/new-products\"\u003eCONDTROL new arrivals\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":51936441565527,"sku":"1-2-0467","price":199.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/Progressor_1_1000x1000_001.webp?v=1763561897"},{"product_id":"kreuzlinienlaser-condtrol-xliner-3d","title":"CONDTROL XLiner 3D cross-line laser","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL XLiner 3D is a green cross-line laser with one horizontal and two vertical 360° planes. Colour OLED display, accuracy ±0.2 mm\/m and IP65 make it a choice for repeated alignment work in drywall and installation.\u003c\/p\u003e\n\u003ch2\u003eHow does it differ from the Smart 3D Plus?\u003c\/h2\u003e\n\u003cp\u003eBoth project three complete 360° planes. According to the manual, the XLiner 3D offers ±0.2 mm\/m, 40\/80 m working range, IP65 and 1\/4″ and 5\/8″ mounts. The Smart 3D Plus offers ±0.3 mm\/m, 30\/60 m and IP54. Choose by working distance, required tolerance and mounting.\u003c\/p\u003e\n\u003ch2\u003eWorking range and self-levelling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 40 m without, up to 80 m with a compatible receiver; the range depends on the lighting conditions\u003c\/li\u003e\n\u003cli\u003eAccuracy ±0.2 mm\/m; self-levelling range ±4°\u003c\/li\u003e\n\u003cli\u003eThree green 360° planes; laser class II, 520 nm\u003c\/li\u003e\n\u003cli\u003eIP65: dust-tight and protected against water jets; not suitable for immersion\u003c\/li\u003e\n\u003cli\u003e1\/4″ and 5\/8″ tripod mounts; weight 950 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOperation and battery change\u003c\/h2\u003e\n\u003cp\u003eThe OLED display shows the operating status; planes are selected according to the task. The manual states up to 20 hours with one laser emitter switched on and about 8 hours with all planes active. The tool runs on a 3.7 V 5000 mAh Li-ion battery; two batteries are included so you can swap them.\u003c\/p\u003e\n\u003ch2\u003eMounting, slope and working in daylight\u003c\/h2\u003e\n\u003cp\u003eWall bracket and clamp holder help you set it up at suitable fixing points. Check stability and the reference after moving it. With the compensator locked, inclined projections are possible; this is not a digital slope setting.\u003c\/p\u003e\n\u003cp\u003eIn bright surroundings, use pulse mode with a compatible receiver. The manual does not describe the 80 m figure as a diameter, and it must not be equated with the diameter figure of a rotary laser. A receiver is not included as standard.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cp\u003eXLiner 3D, two Li-ion batteries, wall bracket, clamp holder, charger, user manual and plastic case.\u003c\/p\u003e\n\u003ch2\u003eMatching tools and applications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/cross-line-laser-3d\"\u003eCompare 3D cross-line lasers\u003c\/a\u003e. For two horizontal heights: \u003ca href=\"\/en\/collections\/cross-line-laser-4d\"\u003e4D lasers\u003c\/a\u003e. For single wall surfaces: \u003ca href=\"\/en\/collections\/cross-line-laser-2d\"\u003e2D lasers\u003c\/a\u003e. \u003ca href=\"\/en\/collections\/tripods-poles\"\u003eChoose tripods and poles by thread and height\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eShipping and warranty\u003c\/h2\u003e\n\u003cp\u003eFree shipping within Germany. Two years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":51936896713047,"sku":"1-2-0423","price":399.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/XLiner_3D_0001.jpg?v=1788398408"},{"product_id":"rotationslaser-condtrol-digi-roto-hvg-800","title":"CONDTROL Digi Roto HVG 800 rotary laser","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL Digi Roto HVG 800 is a green rotary laser with X-actRoto receiver. With the receiver, the working range is up to 800 m in diameter. It is suitable for height transfer and levelling work indoors and outdoors.\u003c\/p\u003e\n\u003ch2\u003eWhat work is the Digi Roto HVG 800 suitable for?\u003c\/h2\u003e\n\u003cp\u003eTransfer reference heights for foundations, check the subgrade or compare heights in outdoor areas. The tool projects horizontal and vertical planes as well as plumb points. In daylight, use the receiver when the laser line is not sufficiently visible.\u003c\/p\u003e\n\u003ch2\u003eKey technical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWorking range with receiver: 800 m diameter, i.e. up to 400 m from the centrally positioned laser.\u003c\/li\u003e\n\u003cli\u003eAccuracy: ±0.025 mm\/m.\u003c\/li\u003e\n\u003cli\u003eElectronic self-levelling: ±5°.\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP66.\u003c\/li\u003e\n\u003cli\u003eTripod mount: 5\/8 inch.\u003c\/li\u003e\n\u003cli\u003eSlope in X and Y: up to ±10%.\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 3,000 rpm via DS-Remote.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScan mode, remote control and battery\u003c\/h2\u003e\n\u003cp\u003eThe speed levels are 0, 300, 600, 1,000, 1,500 and 3,000 rpm. In scan mode you select a sector of 15°, 45°, 90° or 180° to concentrate the projection on the work area. According to the manual, the remote control has a range of up to 500 m; the usable distance depends on the conditions.\u003c\/p\u003e\n\u003cp\u003eThe stated operating time is 30 hours. For the battery in the rotary laser, the manual states about 7 hours to a full charge. Working while charging is permitted; use the supplied charger.\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eMetal frame instead of a purely plastic construction, vulcanised rubber on handles and optics guard. The housing is dust-tight and protected against powerful water jets to IP66. At 3,000 rpm the line looks steady to the eye instead of flickering, which makes indoor work without a receiver easier.\u003c\/p\u003e\n\u003ch2\u003eSetting the gradient\u003c\/h2\u003e\n\u003cp\u003eVia DS-Remote you enter the gradient value digitally. A gradient of 1% corresponds to a height difference of 1 cm per metre. It is not an angle in degrees.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery and additional equipment\u003c\/h2\u003e\n\u003cp\u003eAccording to the user manual: rotary laser, X-actRoto, DS-Remote, charger, laser enhancement glasses, manual and case, plus a holder for the remote control. Tripod and levelling staff are not listed and are chosen separately. Check the right receiver mounting for your application.\u003c\/p\u003e\n\u003cp\u003eLaser enhancement glasses make the line easier to see; they do not protect against laser radiation. Check the tool's accuracy after impacts or falls as described in the manual.\u003c\/p\u003e\n\u003ch2\u003eAccessories and manual\u003c\/h2\u003e\n\u003cp\u003eYou will find suitable set-ups under \u003ca href=\"\/en\/collections\/tripods-poles\"\u003etripods and poles\u003c\/a\u003e. The user manual can be found in the downloads section of this product page.\u003c\/p\u003e\n\u003ch2\u003eWhich model fits better?\u003c\/h2\u003e\n\u003cp\u003eChoose this model if digital gradient input and the higher stated accuracy matter for your work. ±0.025 mm\/m corresponds mathematically to 2.5 mm over 100 m. For pure height transfer without digital gradient input, compare the \u003ca href=\"\/en\/products\/condtrol-roto-hvg-800-rotary-laser\"\u003eRoto HVG 800 with manual slope setting\u003c\/a\u003e. \u003ca href=\"\/en\/collections\/rotary-lasers\"\u003eCompare rotary lasers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; warranty\u003c\/h2\u003e\n\u003cp\u003eFree shipping within Germany. Manufacturer's warranty 2 years + 1 year after registration (2+1).\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":51937272889687,"sku":"7-2-145","price":1749.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/DIGI_ROTO_HVG_800_001.jpg?v=1788398409"},{"product_id":"laser-entfernungsmesser-condtrol-vector-200","title":"CONDTROL Vector 200 laser distance meter – 200 m range, 8x camera, Smart Measure app \u0026 P2P","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL Vector 200 is a laser distance meter for long measuring distances and documented site measurement. The measuring range is 0.05 to 200 m, the stated typical accuracy ±1.0 mm under the conditions in the manual. A digital viewfinder with 8x zoom, point-to-point, AreaCam and Bluetooth support your work.\u003c\/p\u003e\n\u003ch2\u003eWhat measuring tasks is the Vector 200 suitable for?\u003c\/h2\u003e\n\u003cp\u003eThe digital viewfinder supports aiming. Point-to-point, AreaCam, Bluetooth and memory for up to 100 values help with more extensive measurements. Four measuring references are available: front, rear, tripod and fold-out end piece.\u003c\/p\u003e\n\u003cp\u003eThe camera makes aiming easier when the laser dot is hard to see. It does not replace a suitable target surface and does not guarantee maximum range in all lighting conditions.\u003c\/p\u003e\n\u003ch2\u003eMeasuring functions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDistance measurement and area and volume calculation\u003c\/li\u003e\n\u003cli\u003eAddition and subtraction, min\/max measurements\u003c\/li\u003e\n\u003cli\u003eIndirect measurements with Pythagoras functions\u003c\/li\u003e\n\u003cli\u003eWall, triangle, trapezoid and circle areas, plus cylinder and cone volumes\u003c\/li\u003e\n\u003cli\u003ePoint-to-point and AreaCam\u003c\/li\u003e\n\u003cli\u003eDigital spirit level, timer, stake-out function and Bluetooth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePoint-to-point:\u003c\/strong\u003e The tool calculates the distance between two sighted points. Both points must be reachable; the function does not measure through obstructing walls or obstacles. \u003cstrong\u003eAreaCam:\u003c\/strong\u003e helps determine dimensions and areas in the camera image as described in the manual.\u003c\/p\u003e\n\u003ch2\u003eUnderstanding range and accuracy\u003c\/h2\u003e\n\u003cp\u003eDirect sunlight, poorly reflecting targets and shiny or transparent surfaces can affect the measurement. The nominal range is not a promise for every target. Set the tool up stably and, in difficult conditions, consider a suitable target plate. IP54 describes protection against dust and splash water; the tool is not waterproof.\u003c\/p\u003e\n\u003ch2\u003eCheck the measuring reference before measuring\u003c\/h2\u003e\n\u003cp\u003eCheck the selected measuring reference point before each series of measurements. For areas, measure length and width; indirect calculations require the set-up described in the manual. Repeat critical measurements before cutting or ordering material.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003eIntegrated 3.7 V \/ 2,500 mAh Li-ion battery, USB Type-C charging cable.\u003c\/p\u003e\n\u003cp\u003eDistance meter, user manual, USB Type-C charging cable and protective pouch. A tripod is not included in this list.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eCompare models and applications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/laser-distance-meters\"\u003eCompare laser distance meters by task\u003c\/a\u003e. For tasks where visibility is critical: \u003ca href=\"\/en\/collections\/laser-distance-meters-camera\"\u003emodels with digital viewfinder\u003c\/a\u003e. For documentation: \u003ca href=\"\/en\/collections\/laser-distance-meters-bluetooth\"\u003edistance meters with Bluetooth\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe user manual and technical data apply to the respective model. Check the scope of delivery and available additional functions before buying.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":51976660943191,"sku":"1-4-0122","price":449.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/Vector_200_HF.webp?v=1763561875"},{"product_id":"rotationslaser-condtrol-roto-hvg-600","title":"CONDTROL Roto HVG 600 rotary laser","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL Roto HVG 600 is a green rotary laser with laser receiver. With the receiver, the working range is up to 600 m in diameter. It is suitable for height transfer and levelling work indoors and outdoors.\u003c\/p\u003e\n\u003ch2\u003eWhat work is the Roto HVG 600 suitable for?\u003c\/h2\u003e\n\u003cp\u003eTransfer reference heights for foundations, check the subgrade or compare heights in outdoor areas. The tool projects horizontal and vertical planes as well as plumb points. In daylight, use the receiver when the laser line is not sufficiently visible.\u003c\/p\u003e\n\u003ch2\u003eKey technical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWorking range with receiver: 600 m diameter, i.e. up to 300 m from the centrally positioned laser.\u003c\/li\u003e\n\u003cli\u003eAccuracy: ±0.05 mm\/m.\u003c\/li\u003e\n\u003cli\u003eElectronic self-levelling: ±5°.\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP66.\u003c\/li\u003e\n\u003cli\u003eTripod mount: 5\/8 inch.\u003c\/li\u003e\n\u003cli\u003eSlope in X and Y: up to ±10%.\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 1,000 rpm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScan mode, remote control and battery\u003c\/h2\u003e\n\u003cp\u003eThe speed levels are 0, 300, 600 and 1,000 rpm. In scan mode you select a sector of 5°, 10°, 30° or 90° to concentrate the projection on the work area. According to the manual, the remote control has a range of up to 150 m; the usable distance depends on the conditions.\u003c\/p\u003e\n\u003cp\u003eThe stated operating time is 22 hours. For the battery in the rotary laser, the manual states about 7 hours to a full charge. Working while charging is permitted; use the supplied charger.\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe rotating head is driven by a brushless motor: no carbon brushes, no commutator wear, smoother and quieter running than classic brushed motors, designed for daily site use. The optics are rubber-protected, and the housing is dust-tight and protected against powerful water jets to IP66. At 1,000 rpm the line looks continuous to the eye rather than flickering.\u003c\/p\u003e\n\u003ch2\u003eSetting the gradient\u003c\/h2\u003e\n\u003cp\u003eThe slope is set manually. Check the desired gradient using reference points. A gradient of 1% corresponds to a height difference of 1 cm per metre. It is not an angle in degrees.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery and additional equipment\u003c\/h2\u003e\n\u003cp\u003eAccording to the user manual: rotary laser, laser receiver, remote control, charger, laser enhancement glasses, manual and case. Tripod and levelling staff are not listed and are chosen separately. Check the right receiver mounting for your application.\u003c\/p\u003e\n\u003cp\u003eLaser enhancement glasses make the line easier to see; they do not protect against laser radiation. Check the tool's accuracy after impacts or falls as described in the manual.\u003c\/p\u003e\n\u003ch2\u003eAccessories and manual\u003c\/h2\u003e\n\u003cp\u003eYou will find suitable set-ups under \u003ca href=\"\/en\/collections\/tripods-poles\"\u003etripods and poles\u003c\/a\u003e. The user manual can be found in the downloads section of this product page.\u003c\/p\u003e\n\u003ch2\u003eWhich model fits better?\u003c\/h2\u003e\n\u003cp\u003eIf 600 m diameter is enough for your site, this model is an option. For larger areas, compare the \u003ca href=\"\/en\/products\/condtrol-roto-hvg-800-rotary-laser\"\u003eRoto HVG 800 with 800 m diameter\u003c\/a\u003e; for digital gradient input, the \u003ca href=\"\/en\/products\/condtrol-digi-roto-hvg-800-rotary-laser\"\u003eDigi Roto HVG 800 with DS-Remote\u003c\/a\u003e. \u003ca href=\"\/en\/collections\/rotary-lasers\"\u003eCompare rotary lasers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; warranty\u003c\/h2\u003e\n\u003cp\u003eFree shipping within Germany. Manufacturer's warranty 2 years + 1 year after registration (2+1).\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":52019868959063,"sku":"7-2-146","price":699.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/Roto_HVG_600_002_1.jpg?v=1788398409"},{"product_id":"rotationslaser-condtrol-roto-hvg-800","title":"CONDTROL Roto HVG 800 rotary laser","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL Roto HVG 800 is a green rotary laser with RotoSense receiver. With the receiver, the working range is up to 800 m in diameter. It is suitable for height transfer and levelling work indoors and outdoors.\u003c\/p\u003e\n\u003ch2\u003eWhat work is the Roto HVG 800 suitable for?\u003c\/h2\u003e\n\u003cp\u003eTransfer reference heights for foundations, check the subgrade or compare heights in outdoor areas. The tool projects horizontal and vertical planes as well as plumb points. In daylight, use the receiver when the laser line is not sufficiently visible.\u003c\/p\u003e\n\u003ch2\u003eKey technical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWorking range with receiver: 800 m diameter, i.e. up to 400 m from the centrally positioned laser.\u003c\/li\u003e\n\u003cli\u003eAccuracy: ±0.05 mm\/m.\u003c\/li\u003e\n\u003cli\u003eElectronic self-levelling: ±5°.\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP66.\u003c\/li\u003e\n\u003cli\u003eTripod mount: 5\/8 inch.\u003c\/li\u003e\n\u003cli\u003eSlope in X and Y: up to ±10%.\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 1,500 rpm via the remote control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScan mode, remote control and battery\u003c\/h2\u003e\n\u003cp\u003eThe speed levels are 0, 300, 600, 1,000 and 1,500 rpm. In scan mode you select a sector of 5°, 10°, 30° or 90° to concentrate the projection on the work area. According to the manual, the remote control has a range of up to 300 m; the usable distance depends on the conditions.\u003c\/p\u003e\n\u003cp\u003eThe stated operating time is 22 hours. For the battery in the rotary laser, the manual states about 7 hours to a full charge. Working while charging is permitted; use the supplied charger.\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe rotating head is driven by a brushless motor: no carbon brushes, no commutator wear, smoother and quieter running than classic brushed motors, designed for daily use on large building sites. The optics are rubber-protected, and the housing is dust-tight and protected against powerful water jets to IP66. At 1,000 to 1,500 rpm the line looks continuous to the eye rather than flickering.\u003c\/p\u003e\n\u003ch2\u003eSetting the gradient\u003c\/h2\u003e\n\u003cp\u003eThe slope is set manually. Check the desired gradient using reference points. A gradient of 1% corresponds to a height difference of 1 cm per metre. It is not an angle in degrees.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery and additional equipment\u003c\/h2\u003e\n\u003cp\u003eAccording to the user manual: rotary laser, RotoSense, remote control, charger, laser enhancement glasses, manual and case. Tripod and levelling staff are not listed and are chosen separately. Check the right receiver mounting for your application.\u003c\/p\u003e\n\u003cp\u003eLaser enhancement glasses make the line easier to see; they do not protect against laser radiation. Check the tool's accuracy after impacts or falls as described in the manual.\u003c\/p\u003e\n\u003ch2\u003eAccessories and manual\u003c\/h2\u003e\n\u003cp\u003eYou will find suitable set-ups under \u003ca href=\"\/en\/collections\/tripods-poles\"\u003etripods and poles\u003c\/a\u003e. The user manual can be found in the downloads section of this product page.\u003c\/p\u003e\n\u003ch2\u003eWhich model fits better?\u003c\/h2\u003e\n\u003cp\u003eThis model offers a larger working range than the Roto HVG 600. For digital gradient input, compare the \u003ca href=\"\/en\/products\/condtrol-digi-roto-hvg-800-rotary-laser\"\u003eDigi Roto HVG 800 with DS-Remote\u003c\/a\u003e. For smaller areas, the \u003ca href=\"\/en\/products\/condtrol-roto-hvg-600-rotary-laser\"\u003eRoto HVG 600 with 600 m diameter\u003c\/a\u003e may be enough. \u003ca href=\"\/en\/collections\/rotary-lasers\"\u003eCompare rotary lasers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; warranty\u003c\/h2\u003e\n\u003cp\u003eFree shipping within Germany. Manufacturer's warranty 2 years + 1 year after registration (2+1).\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":54804090028375,"sku":"7-2-144","price":999.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/ROTO_HVG_800_001.jpg?v=1788398409"},{"product_id":"schichtdickenmessgeraet-condtrol-paint-expert","title":"CONDTROL Paint Expert coating thickness gauge","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\n\u003cp class=\"lede\"\u003eThe \u003cstrong\u003eCONDTROL Paint Expert\u003c\/strong\u003e measures non-destructively the \u003cstrong\u003ethickness of paint and coatings\u003c\/strong\u003e on ferrous and non-ferrous metals. It detects the substrate itself and switches automatically between magnetic induction and eddy current. Measuring range \u003cstrong\u003e0 to 1500 µm\u003c\/strong\u003e, accuracy \u003cstrong\u003e±(3 % + 2 µm)\u003c\/strong\u003e, resolution \u003cstrong\u003e0,1 µm\u003c\/strong\u003e. Free shipping in Germany, 2+1 years' warranty.\u003c\/p\u003e\n\u003ch2\u003eBenefits at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetects the substrate automatically:\u003c\/strong\u003e steel or aluminium – the tool chooses the right measuring method itself. No manual switching, and with it no typical source of error.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0 to 1500 µm:\u003c\/strong\u003e covers everything from thin primer to thickly applied protective layers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution 0.1 µm:\u003c\/strong\u003e even small differences between two measuring points become visible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimits with alarm:\u003c\/strong\u003e you set a window, and the tool reports every value outside it. When checking many parts in a row, you don't have to look at every number.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory for 256 readings:\u003c\/strong\u003e 8 groups of 32 measurements each, with statistics and a chart of the series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotating colour display:\u003c\/strong\u003e 2 inches, readable even when you apply the tool overhead or from the side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration included:\u003c\/strong\u003e Steel and aluminium test plates and six calibration foils are included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eChecking used cars:\u003c\/strong\u003e find repainted and filled areas before you buy. Factory paint is usually around 80 to 150 µm; significantly higher values on a single panel indicate a repair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePaint and body shops:\u003c\/strong\u003e check layer build-up, prove even application, document results for the customer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduction and quality control:\u003c\/strong\u003e check coatings against target values, process series with limit alarm, evaluate measurement series.\u003c\/p\u003e\n\u003ch2\u003eSpecial functions\u003c\/h2\u003e\n\u003ch3\u003eTwo measuring methods in one tool\u003c\/h3\u003e\n\u003cp\u003eOn ferrous metals the Paint Expert works with magnetic induction, on aluminium and other non-ferrous metals with eddy current. The tool decides which method is needed as soon as you place it.\u003c\/p\u003e\n\u003ch3\u003eFour measuring modes\u003c\/h3\u003e\n\u003cp\u003eSingle measurement, continuous measurement, single-point and multi-point testing. Single measurement is enough for a quick check; continuous measurement is faster when scanning a surface.\u003c\/p\u003e\n\u003ch3\u003eStatistics and chart\u003c\/h3\u003e\n\u003cp\u003eStored values can be evaluated as a group: you see the highest and lowest value and the course of the series as a chart. This helps you spot uneven application rather than comparing individual numbers.\u003c\/p\u003e\n\u003ch3\u003eZero and multi-point calibration\u003c\/h3\u003e\n\u003cp\u003eBefore work, calibrate on the supplied test plates, if necessary using several points. This keeps the values reliable even when you switch between different materials.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; warranty\u003c\/h2\u003e\n\u003cp\u003eFree shipping within Germany. Manufacturer's warranty 2 years + 1 year after registration (2+1).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCategory: \u003c\/strong\u003e\u003ca href=\"https:\/\/condtrol.shop\/en\/collections\/katalog-condtrol\" title=\"Catalogue\"\u003eMeasuring tools\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":54856943927639,"sku":"3-7-053","price":219.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/PaintExpert_001.jpg?v=1788398408"},{"product_id":"feuchtigkeitsmessgeraet-condtrol-hydro-check","title":"CONDTROL Hydro Check moisture meter","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\n\u003cp class=\"lede\"\u003eThe \u003cstrong\u003eCONDTROL Hydro Check\u003c\/strong\u003e measures the \u003cstrong\u003emoisture in wood, concrete, brick and stone\u003c\/strong\u003e without damaging the surface. Instead of inserting pins, the tool scans the material \u003cstrong\u003einductively\u003c\/strong\u003e: place the sensor and read the value. The scanning depth is \u003cstrong\u003e19 to 40 mm\u003c\/strong\u003e. Free shipping in Germany, 2+1 years' warranty.\u003c\/p\u003e\n\u003ch2\u003eBenefits at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo holes, no scratches:\u003c\/strong\u003e the inductive method works without pins. You can measure on finished surfaces, parquet or plastered walls without leaving a trace.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 40 mm deep:\u003c\/strong\u003e you see not only the surface but also what the material underneath looks like.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour scale instead of guessing numbers:\u003c\/strong\u003e blue means normal, yellow elevated, red critical. Plus a tone that beeps repeatedly in the red zone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour material modes:\u003c\/strong\u003e building materials, brick and stone, softwood and hardwood. The colour scale limits adapt to the selected material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour display:\u003c\/strong\u003e readable even in bright light and sunshine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHOLD function:\u003c\/strong\u003e freezes the reading when you measure in a spot where you can't see the display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated torch:\u003c\/strong\u003e lights up the measuring point, for example in a crawl space or behind built-in units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch-off after 10 minutes:\u003c\/strong\u003e saves the battery when the tool is left lying around.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction and renovation:\u003c\/strong\u003e check whether screed and plaster are ready for covering, narrow down damp spots on walls, track drying after water damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWood:\u003c\/strong\u003e assess residual moisture of construction timber and firewood, check storage conditions, measure before laying parquet and floorboards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChecking a property:\u003c\/strong\u003e scan cellars, external walls and corners before buying or renting, without leaving marks.\u003c\/p\u003e\n\u003ch2\u003eSpecial functions\u003c\/h2\u003e\n\u003ch3\u003eInductive measurement\u003c\/h3\u003e\n\u003cp\u003eThe tool generates an electromagnetic field and evaluates how the material reacts to it. That's why the surface remains untouched and you can scan large areas quickly instead of piercing at individual points.\u003c\/p\u003e\n\u003ch3\u003eFour material modes\u003c\/h3\u003e\n\u003cp\u003eYou can choose between building materials (plaster, concrete walls, cement floors, tiled surfaces, ceilings), brick and natural stone, softwood and hardwood. The right mode matters because every material reflects moisture differently.\u003c\/p\u003e\n\u003ch3\u003eMeasuring ranges\u003c\/h3\u003e\n\u003cp\u003eWood 2 to 65%, building materials 0.1 to 35%, masonry 0.1 to 20%.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; warranty\u003c\/h2\u003e\n\u003cp\u003eFree shipping within Germany. Manufacturer's warranty 2 years + 1 year after registration (2+1).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCategory: \u003c\/strong\u003e\u003ca href=\"https:\/\/condtrol.shop\/en\/collections\/katalog-condtrol\" title=\"Catalogue\"\u003eMeasuring tools\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":54857206923607,"sku":"3-14-028","price":99.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/Hydro_Check_001.jpg?v=1788398408"}],"url":"https:\/\/condtrol.shop\/en\/collections\/new-products.oembed","provider":"CONDTROL","version":"1.0","type":"link"}