{"title":"Cross-line laser kits with accessories","description":"\u003ch2\u003eCross-line laser with tripod: compare the scope of delivery before buying\u003c\/h2\u003e\n\u003cp\u003eA cross-line laser kit saves you looking for suitable accessories. However, the equipment differs from model to model: a tripod, wall bracket or target plate is only included if it is listed in the scope of delivery on the product page. A protective case is not automatically part of every kit either.\u003c\/p\u003e\n\u003ch3\u003eSimple kit for renovation and installation\u003c\/h3\u003e\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/condtrol-qb-kit-cross-line-laser\"\u003eCONDTROL QB kit with H130 tripod\u003c\/a\u003e projects a red horizontal and a vertical line. The included tripod with height-adjustable head helps you align shelves, pictures and cabinets indoors. The working range is 10 m. Two AAA batteries and the user manual are included to get you started.\u003c\/p\u003e\n\u003ch3\u003eWhich kit suits your task?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle wall surface:\u003c\/strong\u003e One horizontal and one vertical line are often enough for installation and renovation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeveral walls at once:\u003c\/strong\u003e Check whether the specific model offers all-round 360° planes. The term 3D alone does not guarantee three complete 360° planes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking height:\u003c\/strong\u003e Compare the adjustment range of the tripod and the line height you need. A reference line close to the floor is a different task from a line for wall cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBright surroundings and outdoor use:\u003c\/strong\u003e Check visibility, working range and, if necessary, receiver compatibility. An included tripod does not increase the laser range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChoose by type:\u003c\/strong\u003e \u003ca href=\"\/en\/collections\/cross-line-laser-2d\"\u003e2D cross-line lasers\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/cross-line-laser-3d\"\u003e3D cross-line lasers\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/cross-line-laser-4d\"\u003e4D cross-line lasers with additional horizontal plane\u003c\/a\u003e. \u003ca href=\"\/en\/collections\/cross-line-lasers\"\u003eCompare all cross-line lasers\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"kreuzlinienlaser-condtrol-xliner-quattro-360-g-kit","title":"CONDTROL XLiner Quattro 360G Kit cross-line laser","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL XLiner Quattro 360G Kit is a green cross-line laser with two full 360° planes, horizontal and vertical, plus plumb points up and down and Bluetooth control. In the kit: wall bracket \u003ca href=\"\/en\/products\/condtrol-wall-mount-pro-universal-bracket\"\u003eWall Mount Pro\u003c\/a\u003e, clamp holder, \u003ca href=\"\/en\/products\/condtrol-target-plate-green\"\u003emagnetic target plate\u003c\/a\u003e, two rechargeable batteries and protective case.\u003c\/p\u003e\n\u003ch2\u003eWhat tasks is the XLiner Quattro 360G suitable for?\u003c\/h2\u003e\n\u003cp\u003eThe horizontal and vertical planes each run all the way around the room. This lets you mark walls, floor and ceiling in one step without turning the laser: floor levelling, tiles and laminate, wallpapering, windows, doors and furniture, cable routing.\u003c\/p\u003e\n\u003ch3\u003eRemote control via app\u003c\/h3\u003e\n\u003cp\u003eVia Bluetooth and the free XLiner Remote app for smartphone and tablet, you switch planes and brightness from a distance.\u003c\/p\u003e\n\u003ch3\u003eSelf-levelling, pendulum lock, plumb\u003c\/h3\u003e\n\u003cp\u003eSelf-levelling compensates up to ±3.5° and warns you when the laser is tilted too much. With the pendulum locked, you project lines at any angle, for example for stairs and roof slopes. The plumb points (zenith and nadir) transfer marks from the floor to the ceiling.\u003c\/p\u003e\n\u003ch3\u003eRobustly built\u003c\/h3\u003e\n\u003cp\u003eMetal housing, non-slip rubber coating and durable silicone buttons; protected against impacts, dust and splash water (IP54). Mounting via 1\/4″ and 5\/8″ or an eyelet for a screw or nail.\u003c\/p\u003e\n\u003ch2\u003eFunctions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 360° planes (horizontal and vertical), plumb points up and down\u003c\/li\u003e\n\u003cli\u003eGreen laser 515 nm, accuracy ±0.2 mm\/m, self-levelling ±3.5°\u003c\/li\u003e\n\u003cli\u003eRange 60 m, 100 m with receiver\u003c\/li\u003e\n\u003cli\u003eBluetooth control via XLiner Remote, slope and pulse mode\u003c\/li\u003e\n\u003cli\u003eIP54, 1\/4″ and 5\/8″ tripod threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUnderstanding range and accuracy\u003c\/h2\u003e\n\u003cp\u003eThe visibility of the line depends on the ambient light and the surface; the target plate helps at a distance. In sunlight, work with a receiver. The accuracy applies within the self-levelling range of ±3.5°.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003eTwo 7.4 V \/ 2600 mAh Li-ion batteries; according to the manual, more than 8 hours of continuous operation. While one is charging, you keep working with the second.\u003c\/p\u003e\n\u003cp\u003eXLiner Quattro 360G, Wall Mount Pro, clamp holder, magnetic target plate, 2 rechargeable batteries, charger, protective case, user manual.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eCompare models and applications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/cross-line-lasers-remote-bluetooth\"\u003eCompare cross-line lasers with Bluetooth\u003c\/a\u003e. With 360° horizontal and two verticals: \u003ca href=\"\/en\/products\/condtrol-xliner-pento-360g-kit-cross-line-laser\"\u003eXLiner Pento 360G Kit\u003c\/a\u003e. Three 360° planes: \u003ca href=\"\/en\/collections\/cross-line-laser-3d\"\u003e3D cross-line lasers\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":47089501471063,"sku":"7-2-0106","price":385.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/Quattro_360G_KIT-999283.jpg?v=1738866578"},{"product_id":"kreuzlinienlaser-condtrol-xliner-pento-360-g-kit","title":"CONDTROL XLiner Pento 360G Kit cross-line laser","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL XLiner Pento 360G Kit is the green XLiner Pento 360G cross-line laser as a complete kit: with wall bracket \u003ca href=\"\/en\/products\/condtrol-wall-mount-pro-universal-bracket\"\u003eWall Mount Pro\u003c\/a\u003e, clamp holder and \u003ca href=\"\/en\/products\/condtrol-target-plate-green\"\u003emagnetic target plate\u003c\/a\u003e in a protective case. 360° horizontal, two vertical planes, plumb points up and down and Bluetooth control.\u003c\/p\u003e\n\u003ch2\u003eWhat tasks is the Pento 360G Kit suitable for?\u003c\/h2\u003e\n\u003cp\u003eFor anyone who mounts the laser on a wall, profile or batten rather than just on a tripod: drywall, suspended ceilings, tiles, doors and windows, furniture and appliance installation, cable routing. The target plate makes the line easier to see over longer distances.\u003c\/p\u003e\n\u003ch3\u003eRemote control via app\u003c\/h3\u003e\n\u003cp\u003eWith the free XLiner Remote app you switch planes and brightness from a distance, without walking to the laser and moving it.\u003c\/p\u003e\n\u003ch3\u003ePlumb points and slope mode\u003c\/h3\u003e\n\u003cp\u003eThe plumb points (zenith and nadir) transfer marks from the floor to the ceiling, for example for lights or stairs. In slope mode, the laser projects lines at any chosen angle, for decoration, slopes and floor markings.\u003c\/p\u003e\n\u003ch3\u003eRobustly built\u003c\/h3\u003e\n\u003cp\u003eMetal housing, non-slip rubber coating and durable silicone buttons; protected against impacts, dust and splash water (IP54). Mounting via 1\/4″ and 5\/8″ or an eyelet for a screw or nail.\u003c\/p\u003e\n\u003ch2\u003eFunctions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e360° horizontal, two vertical planes, plumb points up and down\u003c\/li\u003e\n\u003cli\u003eGreen laser 515 nm, clearly visible even in bright light\u003c\/li\u003e\n\u003cli\u003eAccuracy ±0.2 mm\/m, self-levelling ±3.5°\u003c\/li\u003e\n\u003cli\u003eRange 60 m, 100 m with receiver\u003c\/li\u003e\n\u003cli\u003eBluetooth control via XLiner Remote, slope and pulse mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUnderstanding range and accuracy\u003c\/h2\u003e\n\u003cp\u003eThe visibility of the line depends on the ambient light and the surface. In sunlight and over long distances, work in pulse mode with a receiver. The accuracy applies within the self-levelling range of ±3.5°.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003eTwo 7.4 V \/ 2600 mAh Li-ion batteries; according to the manual, more than 8 hours of continuous operation, charging time about 3 hours. While one is charging, you keep working with the second.\u003c\/p\u003e\n\u003cp\u003eXLiner Pento 360G, Wall Mount Pro, clamp holder, magnetic target plate, 2 rechargeable batteries, charger, protective case, user manual.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eCompare models and applications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/cross-line-laser-kits\"\u003eCompare cross-line laser kits\u003c\/a\u003e. Tool only: \u003ca href=\"\/en\/products\/condtrol-xliner-pento-360g-cross-line-laser\"\u003eXLiner Pento 360G\u003c\/a\u003e. With two full 360° planes: \u003ca href=\"\/en\/products\/condtrol-xliner-quattro-360g-kit-cross-line-laser\"\u003eXLiner Quattro 360G Kit\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":47089507041623,"sku":"1-2-0410","price":299.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/products\/Xliner-Pento-360G1000x1000_set_kit_732f2dc5-80d8-4b35-be48-25ad8a8e3159-721139.webp?v=1738022714"},{"product_id":"kreuzlinienlaser-condtrol-xliner-combo-360-g-kit","title":"CONDTROL XLiner Combo 360G Kit cross-line laser","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL XLiner Combo 360G Kit is a green cross-line laser with a 360° horizontal line, vertical lines, plumb point and Bluetooth control, supplied with Wall Mount Pro wall bracket, clamp holder and magnetic target plate. Accuracy ±0.2 mm\/m, self-levelling ±3.5°, IP54.\u003c\/p\u003e\n\u003ch2\u003eWhat tasks is the XLiner Combo 360G suitable for?\u003c\/h2\u003e\n\u003cp\u003eRoom layout, tiles and floor coverings, furniture and kitchen installation, decoration, drywall. The horizontal 360° line runs around all walls, plus vertical lines, cross lines and inclined lines. With the brackets from the kit, the laser sits on a wall, profile or pipe exactly at the height you need.\u003c\/p\u003e\n\u003ch3\u003ePlumb point from floor to ceiling\u003c\/h3\u003e\n\u003cp\u003eThe plumb function transfers reference points from the floor to the ceiling, for example for lights, partition walls or ceiling elements.\u003c\/p\u003e\n\u003ch3\u003eRemote control via app\u003c\/h3\u003e\n\u003cp\u003eVia Bluetooth and the free XLiner Remote app (App Store and Google Play), you switch laser lines and points on and off and adjust the brightness without walking to the tool.\u003c\/p\u003e\n\u003ch3\u003eLine close to the floor\u003c\/h3\u003e\n\u003cp\u003eThe horizontal 360° line runs close to the base of the housing. This lets you put marks directly on skirting boards or the floor without converting.\u003c\/p\u003e\n\u003ch3\u003eSlope and pulse mode\u003c\/h3\u003e\n\u003cp\u003eIn slope mode, self-levelling is off and the line can be projected at any angle: for stairs, railings or diagonal tile patterns. In pulse mode, the laser works with a receiver even outdoors and in bright light.\u003c\/p\u003e\n\u003ch2\u003eFunctions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e360° horizontal, vertical lines, cross lines, plumb point\u003c\/li\u003e\n\u003cli\u003eGreen laser 520 nm, accuracy ±0.2 mm\/m, self-levelling ±3.5°\u003c\/li\u003e\n\u003cli\u003eRange 50 m, 100 m with receiver\u003c\/li\u003e\n\u003cli\u003eBluetooth control via XLiner Remote\u003c\/li\u003e\n\u003cli\u003eSlope and pulse mode\u003c\/li\u003e\n\u003cli\u003eIP54, 1\/4″ and 5\/8″ tripod threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUnderstanding range and accuracy\u003c\/h2\u003e\n\u003cp\u003eThe visibility of the line depends on the ambient light and the surface; the magnetic target plate makes it easier to see at a distance. In sunlight, work in pulse mode with a receiver. The accuracy applies within the self-levelling range of ±3.5°.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003e4 × AA batteries (LR6), available everywhere.\u003c\/p\u003e\n\u003cp\u003eXLiner Combo 360G, \u003ca href=\"\/en\/products\/condtrol-wall-mount-pro-universal-bracket\"\u003eWall Mount Pro\u003c\/a\u003e, clamp holder, magnetic target plate, 4 AA batteries, protective pouch, user manual.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eCompare models and applications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/cross-line-lasers\"\u003eCompare cross-line lasers\u003c\/a\u003e. More models with app: \u003ca href=\"\/en\/collections\/cross-line-lasers-remote-bluetooth\"\u003ecross-line lasers with remote control and Bluetooth\u003c\/a\u003e. More kits: \u003ca href=\"\/en\/collections\/cross-line-laser-kits\"\u003ecross-line lasers with accessories\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":47089507434839,"sku":"1-2-0412","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/Combo_360G_KIT-788466.jpg?v=1763562280"},{"product_id":"kreuzlinienlaser-condtrol-qb-set","title":"CONDTROL QB kit cross-line laser","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL QB kit is a compact cross-line laser with a red horizontal and vertical line, supplied with an H130 tripod with height-adjustable head. Working range 10 m, self-levelling up to ±5°, accuracy ±0.5 mm\/m, IP54. Unpack, set up, start.\u003c\/p\u003e\n\u003ch2\u003eWhat tasks is the QB suitable for?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAligning walls, floors and ceilings\u003c\/li\u003e\n\u003cli\u003eLaying floor coverings, wallpapering, tiling\u003c\/li\u003e\n\u003cli\u003eInstalling door and window frames\u003c\/li\u003e\n\u003cli\u003eMounting wall cabinets, shelves, curtain rails and decorations\u003c\/li\u003e\n\u003cli\u003eMarking out electrical installations and cable routes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTwo operating modes\u003c\/h3\u003e\n\u003cp\u003eIn automatic mode, the laser levels itself up to ±5° and shows horizontal and vertical lines. With the compensator locked, it projects lines at any angle, for example for stairs or roof slopes.\u003c\/p\u003e\n\u003ch3\u003eRobust despite its small size\u003c\/h3\u003e\n\u003cp\u003eThe “housing within a housing” principle protects the compensator from impacts. The ribbed rubber coating sits securely in the hand and protects against falls from up to 1 m. Sealed housing and rubberised battery compartment edge: IP54 against dust and splash water.\u003c\/p\u003e\n\u003ch2\u003eFunctions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal and vertical line, cross line\u003c\/li\u003e\n\u003cli\u003eRed laser 635 nm, working range 10 m, accuracy ±0.5 mm\/m\u003c\/li\u003e\n\u003cli\u003eSelf-levelling ±5°, slope mode\u003c\/li\u003e\n\u003cli\u003eIP54, 1\/4″ tripod thread, 175 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUnderstanding range and visibility\u003c\/h2\u003e\n\u003cp\u003eThe QB is made for indoor use. A red line is harder to see in bright daylight than a green one; for bright rooms and more range there is the QB Green with 20 m. The accuracy applies within the self-levelling range of ±5°.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003e2 × AAA batteries.\u003c\/p\u003e\n\u003cp\u003eQB, H130 tripod, 2 AAA batteries, user manual.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eCompare models and applications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/cross-line-laser-2d\"\u003eCompare 2D cross-line lasers\u003c\/a\u003e. With green laser: \u003ca href=\"\/en\/products\/condtrol-qb-green-set-cross-line-laser\"\u003eQB Green Set\u003c\/a\u003e. With 360° planes: \u003ca href=\"\/en\/collections\/cross-line-laser-3d\"\u003e3D cross-line lasers\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":47089509695831,"sku":"1-2-0121","price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/QB_set-449661.jpg?v=1738866153"},{"product_id":"kreuzlinienlaser-condtrol-qb-green","title":"CONDTROL QB Green Set cross-line laser","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL QB Green Set is a compact cross-line laser with a true green line, supplied with an H130 tripod with height-adjustable head. Working range 20 m, self-levelling up to ±5°, accuracy ±0.5 mm\/m, IP54. The green line is clearly visible even in bright rooms.\u003c\/p\u003e\n\u003ch2\u003eWhat tasks is the QB Green suitable for?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAligning walls, floors and ceilings\u003c\/li\u003e\n\u003cli\u003eLaying floor coverings, wallpapering, tiling\u003c\/li\u003e\n\u003cli\u003eInstalling door and window frames\u003c\/li\u003e\n\u003cli\u003eMounting wall cabinets, shelves, curtain rails and decorations\u003c\/li\u003e\n\u003cli\u003eMarking out electrical installations and cable routes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTwo operating modes\u003c\/h3\u003e\n\u003cp\u003eIn automatic mode, the laser levels itself up to ±5° and shows horizontal and vertical lines. With the compensator locked, it projects lines at any angle, for example for stairs or roof slopes.\u003c\/p\u003e\n\u003ch3\u003eRobust despite its small size\u003c\/h3\u003e\n\u003cp\u003eThe “housing within a housing” principle protects the compensator from impacts. The ribbed rubber coating sits securely in the hand and protects against falls from up to 1 m. Sealed housing and rubberised battery compartment edge: IP54 against dust and splash water.\u003c\/p\u003e\n\u003ch2\u003eFunctions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal and vertical line, cross line\u003c\/li\u003e\n\u003cli\u003eGreen laser 520 nm, working range 20 m, accuracy ±0.5 mm\/m\u003c\/li\u003e\n\u003cli\u003eSelf-levelling ±5°, slope mode\u003c\/li\u003e\n\u003cli\u003eIP54, 1\/4″ tripod thread, 175 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUnderstanding range and visibility\u003c\/h2\u003e\n\u003cp\u003eThe QB Green is made for indoor use. The green line is much brighter to the eye than a red one, but it too becomes fainter in direct sunlight. The accuracy applies within the self-levelling range of ±5°.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003e2 × AAA batteries.\u003c\/p\u003e\n\u003cp\u003eQB Green, H130 tripod, 2 AAA batteries, user manual.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eCompare models and applications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/cross-line-laser-2d\"\u003eCompare 2D cross-line lasers\u003c\/a\u003e. More affordable with red line: \u003ca href=\"\/en\/products\/condtrol-qb-kit-cross-line-laser\"\u003eQB Set\u003c\/a\u003e. With 360° planes: \u003ca href=\"\/en\/collections\/cross-line-laser-3d\"\u003e3D cross-line lasers\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":47089510121815,"sku":"9015301000","price":95.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/Qb-Green_001_set-553428.jpg?v=1738866122"},{"product_id":"kreuzlinienlaser-condtrol-omniliner-g3d-kit","title":"CONDTROL Omniliner G3D Kit cross-line laser","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL Omniliner G3D Kit is the green Omniliner G3D 3D cross-line laser as a complete kit: with wall bracket, clamp holder, magnetic target plate, two rechargeable batteries and charger in a case. Three 360° laser planes, self-levelling up to ±4°, accuracy ±0.2 mm\/m, Bluetooth control and IP65.\u003c\/p\u003e\n\u003ch2\u003eWhat tasks is the G3D Kit suitable for?\u003c\/h2\u003e\n\u003cp\u003eFor anyone who uses the laser not only on a tripod: with the wall bracket it sits on profiles or walls at the desired height, and the clamp holder fixes it to pipes, battens and door frames. The magnetic target plate makes the line more visible over longer distances. Typical uses are drywall, suspended ceilings, tiling and installation.\u003c\/p\u003e\n\u003ch3\u003eLaser outputs close to wall and corner\u003c\/h3\u003e\n\u003cp\u003eThe laser emitters are arranged so that the tool can stand directly against the wall or in the corner. This saves auxiliary measurements and material when aligning in hard-to-reach places.\u003c\/p\u003e\n\u003ch3\u003eRemote control via app\u003c\/h3\u003e\n\u003cp\u003eVia Bluetooth and the free XLiner Remote app, you switch laser planes and brightness from a distance, without walking to the tool and moving it.\u003c\/p\u003e\n\u003ch3\u003eSlope and pulse mode\u003c\/h3\u003e\n\u003cp\u003eIn manual slope mode, the laser projects inclined lines, for example for stairs and roof slopes. In pulse mode, it works with a laser receiver and extends the working range to 100 m, even in bright light and outdoors.\u003c\/p\u003e\n\u003ch2\u003eFunctions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThree green 360° laser planes, self-levelling ±4°\u003c\/li\u003e\n\u003cli\u003eAccuracy ±0.2 mm\/m, range 50 m, 100 m with receiver\u003c\/li\u003e\n\u003cli\u003eBluetooth control via the XLiner Remote app\u003c\/li\u003e\n\u003cli\u003eManual slope mode and pulse mode for receiver\u003c\/li\u003e\n\u003cli\u003eMetal frame protects the pendulum, ribbed rubber coating against impacts, IP65\u003c\/li\u003e\n\u003cli\u003e1\/4″ and 5\/8″ tripod threads plus eyelet for screw or nail\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUnderstanding range and accuracy\u003c\/h2\u003e\n\u003cp\u003eThe visibility of the line depends on the ambient light and the surface. In sunlight or over long distances, work in pulse mode with a receiver. The stated accuracy applies within the self-levelling range of ±4°; mount the tool securely.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003eTwo 3.7 V \/ 5200 mAh Li-ion batteries: while one is charging, you keep working with the second.\u003c\/p\u003e\n\u003cp\u003eOmniliner G3D, wall bracket, clamp holder, magnetic target plate, 2 rechargeable batteries, charger, user manual, case.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eCompare models and applications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/cross-line-laser-3d\"\u003eCompare 3D cross-line lasers\u003c\/a\u003e. Tool only, with batteries: \u003ca href=\"\/en\/products\/condtrol-omniliner-g3d-cross-line-laser\"\u003eOmniliner G3D\u003c\/a\u003e. More kits: \u003ca href=\"\/en\/collections\/cross-line-laser-kits\"\u003ecross-line lasers with accessories\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":47089510875479,"sku":"1-2-0406","price":349.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/Omniliner_G3_KIT-182413.jpg?v=1763562260"},{"product_id":"kreuzlinienlaser-condtrol-neo-g220-set","title":"CONDTROL NEO G220 Set cross-line laser – precision for professional building projects","description":"\u003csection class=\"product-copy\" lang=\"de\"\u003e\u003cp\u003eThe CONDTROL NEO G220 Set is a green cross-line laser with horizontal and vertical line, supplied with H130 tripod, magnetic holder, thread adapter and fastening strap in a plastic case. Accuracy ±0.3 mm\/m, self-levelling up to ±4.5°, range with receiver 50 m, IP54.\u003c\/p\u003e\n\u003ch2\u003eWhat tasks is the NEO G220 suitable for?\u003c\/h2\u003e\n\u003cp\u003eAlignment in interior finishing, tiling, wallpapering, furniture and kitchen installation, drywall. With the accessories from the kit, you can mount the laser almost anywhere:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eon tripods with 1\/4″ and 5\/8″ thread\u003c\/li\u003e\n\u003cli\u003ewith a clip on profiles\u003c\/li\u003e\n\u003cli\u003ewith a strap on vertical profiles or columns\u003c\/li\u003e\n\u003cli\u003eon a nail or screw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSwitch lines individually\u003c\/h3\u003e\n\u003cp\u003eThe horizontal and vertical lines can be switched on separately. If you only need one line, the batteries last correspondingly longer.\u003c\/p\u003e\n\u003ch3\u003eRobust and protected\u003c\/h3\u003e\n\u003cp\u003eRubber coatings on the sides protect the housing from damage, dust, dirt and splash water (IP54).\u003c\/p\u003e\n\u003ch2\u003eFunctions at a glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGreen horizontal and vertical line (520 nm)\u003c\/li\u003e\n\u003cli\u003eAccuracy ±0.3 mm\/m, self-levelling ±4.5°\u003c\/li\u003e\n\u003cli\u003eWork with receiver up to 50 m\u003c\/li\u003e\n\u003cli\u003eLines switchable individually, IP54\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUnderstanding range and visibility\u003c\/h2\u003e\n\u003cp\u003eThe green line looks brighter to the eye than a red one. In direct sunlight and over long distances, work with a receiver. The accuracy applies within the self-levelling range of ±4.5°.\u003c\/p\u003e\n\u003ch2\u003ePower supply and scope of delivery\u003c\/h2\u003e\n\u003cp\u003e3 × AA batteries (LR6).\u003c\/p\u003e\n\u003cp\u003eNEO G220, H130 tripod, magnetic holder, 5\/8″ to 1\/4″ adapter, fastening strap, 3 AA batteries, plastic case, user manual.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e2 years' warranty; one additional year after registration in accordance with the warranty terms.\u003c\/p\u003e\n\u003ch2\u003eCompare models and applications\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/cross-line-laser-kits\"\u003eCompare cross-line laser kits\u003c\/a\u003e. Without tripod and case: \u003ca href=\"\/en\/products\/condtrol-neo-g200-cross-line-laser\"\u003eNEO G200\u003c\/a\u003e. Matching receiver: \u003ca href=\"\/en\/products\/condtrol-ulr-receiver\"\u003eULR\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":47089513988439,"sku":"1-2-0137","price":215.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/products\/7f76f7eb546b7538a5ea2cfabe4a0958-266486_210ff85e-515a-46a1-b67d-91062cac7483-489671.jpg?v=1738865918"},{"product_id":"kreuzlinienlaser-condtrol-smart-2d-plus-set","title":"CONDTROL Smart 2D Plus Set cross-line laser","description":"\u003cp\u003e\u003cb\u003eCONDTROL Smart 2D Plus – precise cross-line laser for renovation and interior fit-out\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eCONDTROL Smart 2D Plus\u003c\/b\u003e is a compact, easy-to-use \u003cb\u003ecross-line laser\u003c\/b\u003e that projects both \u003cb\u003evertical and horizontal lines\u003c\/b\u003e. Whether \u003cb\u003eassembling furniture, laying tiles, wallpapering or aligning shelves and curtain rails\u003c\/b\u003e – the \u003cb\u003eSmart 2D Plus\u003c\/b\u003e lets you do the job precisely and efficiently.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eRobust design for daily use\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003e\"housing-in-housing\" concept\u003c\/b\u003e protects the sensitive compensator unit from knocks and vibration. The \u003cb\u003erubberised, non-slip surface\u003c\/b\u003e ensures a secure grip and protects the device in falls from up to \u003cb\u003e1 metre\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eReliable protection against dust and splashing water\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThanks to \u003cb\u003eprotection class IP54\u003c\/b\u003e, the \u003cb\u003eSmart 2D Plus\u003c\/b\u003e is suitable for building sites and renovation work. The \u003cb\u003esealed housing\u003c\/b\u003e and the \u003cb\u003eadditional seal on the battery compartment\u003c\/b\u003e protect the laser from dust, moisture and dirt.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh visibility for precise results\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eSmart 2D Plus\u003c\/b\u003e offers a \u003cb\u003eworking range of up to 30 m\u003c\/b\u003e, up to 60 m with a compatible receiver in pulse mode, and projects \u003cb\u003eclear, highly visible green laser lines\u003c\/b\u003e. Levelling accuracy ±0.3 mm\/m, self-levelling range ±4°.\u003c\/p\u003e","brand":"CONDTROL","offers":[{"title":"Default","offer_id":50152060092759,"sku":"1-2-0446","price":74.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/4589\/3368\/files\/Smart_2D_Plus_Set.webp?v=1741781296"}],"url":"https:\/\/condtrol.shop\/en\/collections\/cross-line-laser-kits.oembed","provider":"CONDTROL","version":"1.0","type":"link"}